A quick and easy to use maintenance spray based on the Modesta M1SHOT, intended for frequent end customer usage. Easy to use under all conditions, easy wipe off with fewer streaks.
 
Modesta M2 Blast - Ceramic Coating Maintenance Spray maintains and conditions coatings of the Modesta line. May also be used as a standalone protective sealant with limited durability.
 
How to use it:

1. Wash the vehicle - Thoroughly wash the vehicle to remove all dirt and contamination. Use the ModestaM4SMOKE for the final wash step.
 
2. Apply M2 Blast to a clean microfiber - Apply two sprays of M2BLAST to a clean, high quality microfiber and spread evenly on the wetsurface. Never spray directly onto the surface! Do not use too much product!
 
3. Wipe with a clean microfiber - Wipe with a clean dry microfiber until smooth and shiny.
 
Additional information:
 
Always ensure that surface is properly cleaned before application. Do not apply to contaminated and dirty surfaces. Test on an inconspicuous place
before applying. Never apply at windy or dusty place, in rain, direct sunlight or heat. Surface should have mild (room) temperature before application.
Avoid working in too cold or too hot environments. Apply at well-ventilated place.
Do not apply on recently repainted parts. If you are using Modesta on a new car or a car that has been painted, make sure that the paint is properly
cured before application. In some cases, the paint on new cars might still be fresh and not fully cured. If you are unsure about the curing stage of the
paint then you should wait 4-8 weeks after the vehicle was handed over to you.
Do not combine Modesta M2 Blast - Ceramic Coating Maintenance Spraywith other products than those recommended.
Apply only to painted surfaces - never apply to glass, unpainted plastic parts, tires or rubber.